Which Detectors can be re-calibrated?
All our breathalyzers can be calibrated. If you go to our breathalyzer calibration page you can scroll through our new and old models to see if we can calibrate it. If you can not find your model you can always call the calibration team on 0208 454 7372 to see if they can.
Can I recalibrate my Alcohol Detector myself?
No. Professional recalibration equipment is required, and a licence from Customs & Excise is needed to purchase, store and use the materials required so the detector must be returned to us for recalibration.
What if I have a detector with exchangeable sensor?
If you have an AL6000, AL7000, AlcoDigital Platinum or AlcoDigital EON, sensors are available from £19.95 that you can fit yourself – Buy Now
How often do they need to be Calibrated?
Think of calibration as a service on your car. If you use the car a lot, you need to have it serviced more often – but even if your car just sits in the garage for most of the time, it still needs an annual service. Sometimes, leaving your car out of use can lead to more service work than using it regularly. It’s the same with a Breathalyzer. Most people will do less than 500 tests a year, in which case an annual service will be fine, however if it spends long periods of time out of use, this in itself can lead to problems with the sensor drying out. It’s best to use it at least a couple of times a month to make sure this doesn’t happen.
Another reason for regular calibration is because if a Breathalyzer hasn’t been recalibrated for some time it is possible that the sensor will move so far out of range that it cannot be brought back into the operating range. We therefore recommend personal devices be done every 12 months, or if you’re using it to test someone else every 6 months. Using a detector within less than the minimum time after drinking (20mins) or smoking (10mins) can dramatically reduce a sensor’s life before it needs recalibrating, or in some cases replacing if excessive smoke/alcohol or other contaminants have been blown into the unit. Users must remember that these are sensitive medical instruments and must be used in accordance with the supplied User Guide.
How do I know if my unit needs Calibrating?
When the readings start to lose consistency. 3 tests, each taken 2 minutes apart and with a consistent blow should produce readings within a narrow margin; the degree of “wander” will vary depending upon the quality of detector purchased but a regular user will become accustomed to the level of accuracy he/she would expect. When the readings start to vary too greatly for accurate use then the unit should be sent for calibration. If in doubt, call us on 0208 454 7372 or contact us via our customer support centre.
Can you recalibrate a detector I’ve purchased elsewhere?
Possibly – we are authorised to calibrate over 58 devices currently available in the UK. Contact us and let us know what type of unit it is. If we can, we will.
To order calibration now, click here.